EverFab - Santa Clara County

Your trusted partner for compliance

A California bathroom design must comply with federal accessibility standards mandated by the ADA and FHA, as well as state regulations. In California, fiberglass showers and other bathroom accessories must also comply with CA Title 24.

ADA

FHA

CA TITLE 24

CA TITLE 24 MADE EASY

Fiberglass shower manufacturers don’t always clearly indicate which of their products are CA Title 24-compliant. In these cases, you must request more information or conduct your own research to ensure the products you buy comply with your project’s requirements.

EverFab offers a simpler way by clearly labeling all of our CA Title 24-compliant shower units.

These models share the following features:

EverFab’s signature bottom plate
Anti-slip floor design
Built-in reinforcement30-year limited warranty

CA TITLE 24 QUICK FACTS

CA Title 24-compliant showers may be a single piece or multiple pieces. You can install them directly onto an existing sub-floor, eliminating the need for a recessed floor. CA Title 24 specifies many parameters for showers that make them safe and accessible by seniors, including minimum interior dimensions, maximum slope and maximum curb. It also requires compliant showers to have features such as a single-lever low-flow mixing valve, grab bar, fold-down seat and soap dish.

SHOP CA TITLE 24

About eight million people in California have some type of disability as defined by the ADA. California enforces this law more strictly than other states and has its own building codes for accessibility. In addition, the California Commission on Disability Access (CCDA) ensures builders comply with California Building Codes and Federal accessibility standards. The following statistics apply to ADA violations in California:

$4,000+

Fines plus attorney's fees

20,000

Lawsuits since 1992

$20 million

Average annual cost

FEATURED ONE-PIECE SHOWER UNITS

S4452A
3 ½’ Transfer Shower

This model has a clear floor space of 42″x 48″ and weighs about 135 pounds. The built-in reinforcement uses EverFab’s core material, which supports the optional installation of grab bars and a folding seat. A pre-installed curtain rod is optional for the S4452A. Learn More

S6334A
5’ Roll-In Shower

The S6334A has a clear floor space of 60″x 30″ and weighs about 150 pounds. The built-in reinforcement supports the addition of a seat and grab bars after the main unit has been installed. This model includes an optional curtain rod. Learn More

S6336A
5’ Roll-In Shower

This model has a clear floor space of about 60”x 30” and weighs about 115 pounds. The built-in reinforcement supports the later addition of grab bars and a seat. The finish is a stain-resistant white gel coat, and a curtain rod is optional for the S6336A. Learn More

TS6032A
5’ Tub-Shower Combo Unit with Shelf

The TS6032A has a clear floor space of approximately 60”x 30”. It has built-in reinforcement that supports the later installation of a seat and grab bars. A pre-installed curtain rod is optional for this model. The white gel coat finish is stain-resistant. Learn More